Amped WiFi Range Extender

Do you often find yourself in a mess during the installation process of your Amped wireless range extender? If you are unable to access https://setup.ampedwireless.com in order to modify the settings of your wireless range extender, give a quick read to this post. Even when you have your WiFi range extender connected, your internet connection remains non-existent. If yes is the only possible response to these questions, then everyone may relax. A solution has been found and is at hand.

Your Amped WiFi extender may be fixed by either resetting it or updating the firmware to the most current version. Both approaches are covered in this guide so you can easily resolve the difficulties. So, read on!

How to Reset an Amped Wireless Extender?

You can easily reset your WiFi range extender in one of two ways.

1. Through its user-friendly web-based interface.
2. By pressing the Reset button.

Both of these approaches have been described as simply as possible. Don’t stop scrolling down!

Reset Amped Extender via Web User Interface

• Get started by plugging your WiFi range extender into your network.
• Turn on the laptop.
• Launch your preferred web browser and go to the ‘Amped extender setup’ page.
• If you already have an Amped extender, you can skip this step and just enter your login information.
• Then, choose “Settings,” and last, the “Reset” button.
• Check that you really want to start again.

Okay, that’s all there is to it. It seems that you have successfully reset your Amped wireless range extender.

Reset Amped Extender With Reset Button

• If possible, position your Amped WiFi range extender close to your primary WiFi access point.
• Plug it into an electrical socket to power it up.
• Time to look for the button called Reset that allows you to reset the Amped WiFi range extender.
• Take a paper clip and reset the device by pressing the button.
• Twiddle your thumbs until you see green lights on your Amped.
• It seems that you have successfully reset your Amped WiFi range extender.

Your Amped WiFi range extender may be re-setup when it has been successfully reset. Once your WiFi extender has been properly set up, you’ll have network access in previously unreachable areas of your home or office.

If you still have trouble getting the most out of your wifi range extender or accessing the internet, it is likely time to update to the latest version of Amped WiFi device.

When and How to Do Amped Upgrade?

Follow the instructions below to upgrade the firmware on your Amped WiFi range extender:

• It’s recommended that you position the Amped range extender close to your existing WiFi gateway.
• The next step is to put an electrical outlet to use for powering up the range extender. The power indicator light must become solid green.
• Visit the Amped admin page with the help of a recently updated web browser.
• Attempt to enter the password for your WiFi booster.
• You may now set up your Amped range extender by following the on-screen prompts.
• Whenever you’re ready, click the Save button.
• Proceed to the ‘Settings’ menu by clicking there now.
• Select the update firmware option.
• To do a check online, choose that option.
• A new firmware will get installed mechanically if one is available.

In case your device does not support a firmware update check, then it is advised that you download the firmware update file for your extender. However, it should be in line with the model number of your Amped device. As soon as you download the firmware file, do Ampedextender login and upload the file on your device’s dashboard.

Let’s Conclude

With that, we’ve reached the end of the post revealing the Amped extender reset and the firmware upgrade process. Hopefully, you will now be able to get the most out of your device with the help of this post.